The SYNCHRONIZED SHIFT technology inherent in the shifters means riders can rely solely on one shifter to take care of their rear and front gear changes. A customizable shift map means riders can program the exact gear ratio at which Di2 automatically shifts into the big ring when going up through the gears, or into the small ring when going down through the gears. Whichever gear ratio you choose, Shimano’s Rhythm Step philosophy ensures that riders make the minimum amount of incremental steps when changing up or down gears, allowing the rider to maintain an even cadence and fluid riding style. No large gear steps, no over-working joints and muscles, just effortless pedaling throughout the gear range. No compromises, just a focus on simplicity and enjoyment.
The shifters are designed to work in harmony with the SC-MT800 system information display, the RD-M8050 rear derailleur and the FD-M8070 front derailleur. Not only does the SC-MT800 system information display give a visual display of the rider’s gear and battery level, but it is also the control point for operating the trim adjustment and reboot function and wirelessly adjusting the multi-shift speed and SYNCHRONIZED SHIFT operation via computer, tablet or smart phone.
The FD-M8070 front derailleur and RD-M8050 rear derailleur retain the accurate and stable shifting developed for XTR Di2 components. Computer-controlled auto trim on the front derailleur keeps the drivetrain running smoothly. Meanwhile, at the rear, changes are seamless, even under high loads, on steep inclines or when cassettes are more mud than teeth. The derailleur motors are twice as powerful as those on Dura-Ace and Ultegra Di2 to give precise shifting in difficult conditions.
Battery performance is identical to that of its big brother, XTR Di2, giving a minimum of several hundred kilometres of power under heavy usage (eg lots of shifting over three chainrings plus control of ancillary devices). The visual LED display indicates battery charge and the LED screen shuts off after a few seconds of inactivity to save battery life. If you do find yourself running low, charging the battery takes around 90 minutes and internal batteries work on a simple plug and play operation so can be easily swapped.
Durability is also in line with XTR Di2 components. A sealed, waterproof system means DEORE XT Di2’s electronic signals will stand up to mud, water and dirt from the worst of winter. Plus, with no worrying about cross-chaining, cable stretch, or cable adjustments, your gear changes will be incredibly consistent.
Shimano DEORE XT Di2 components will be available from September 2016. Get ready for the trail to triumph.