If the screen does not display properly, refresh your browser window.
Ver. 4.0.3
Pairing operation process of rear derailleur and dual control lever of some units cannot be completed, when the firmware version of ST-R9270 is lower than ver. 4.0.2.
If pairing operation process cannot be completed, use one of below applications to update the firmware version of ST-R9270 to ver. 4.0.3 or higher.
* Following is the firmware updating procedure of each application, E-TUBE PROJECT Professional Ver.5.0.2 or higher, or E-TUBE PROJECT Cyclist Ver.5.0.2 or higher.
Procedure using the E-TUBE PROJECT Professional:
* Use SM-PCE02 to connect the PC and the dual control lever by wire, next, update the firmware, and finally do the pairing.
* In case SM-PCE02 is not available, please contact the place where you purchased the product.
Update: https://si.shimano.com/iUM/7J4WA/update/toc_task_nnp_xs2_g4b
Pairing: https://si.shimano.com/iUM/7J4WA/pairing_process/TOC_PAIRING_PROCESS
Procedure using the E-TUBE PROJECT Cyclist:
* Connect the rear derailleur and the dual control lever by wire, next, update the firmware, and finally do the pairing.
Update: https://si.shimano.com/iUM/7J4WA/update/toc_task_nnp_xs2_g4b
Pairing: https://si.shimano.com/iUM/7J4WA/pairing_process/TOC_PAIRING_PROCESS
Ver. 4.0.2
Firmware released.