CUSTOMIZABLE SETTINGS OFF THE BIKE
Shimano E-TUBE PROJECT allows you to customize your settings and
update firmware.
Update Your Bike Experience
With E-TUBE PROJECT
With E-TUBE PROJECT Cyclist, the fun starts before the ride begins.
- Check the remaining battery level and the latest firmware update.
- Select the shift mode settings from three options, including standard shift, SHIMANO SEMI-SYNCHRONIZED SHIFT, and SYNCHRONIZED SHIFT.
- Set up or change switch functions to customize your experience.
Supercharge your trail riding with customized settings.
- Find the ideal balance of assist torque and pedaling input torque to match how you like to ride.
- Adjust the assist maximum torque to the trail conditions.
- Then, complete the assist character setting by optimizing assist output speed. Switch between preset profiles to enjoy e-MTB riding.
Experience a much more intuitive ride with your personal power assistant
Enjoy every ride in any condition with customized e-bike settings.
- You can change the default AUTOMATIC SHIFT timings with the app if you prefer the shift timing to happen sooner or later than the default settings.
- Ride with confidence, even through a busy city full of traffic lights, since it automatically shifts while you coast to a stop and puts you in the optimal start gear for when you get going again.
SHIMANO ID
Log in with a SHIMANO ID* to easily register and share bike information with other SHIMANO apps.
Download the app and register or log in with a SHIMANO ID to get started.
*Some functions are only available to users with a SHIMANO ID.
Click here to see if SHIMANO ID is available in your area.
DOWNLOADLET'S DOWNLOAD IT NOW!
E-TUBE PROJECT CyclistOperating system
iOS12 or later
iPhone SE, iPhone 6 or later
Android 6.0 or later
Smartphone(*)
*Functionality is not guaranteed on all Android devices.
Required components
Bluetooth Ver.4.1 or later
E-TUBE PROJECT ProfessionalOperating system
Windows 8.1 32bit/64bit
Windows 10 32bit/64bit
Windows 11 32bit/64bit
Required components
.NET Framework 4.6.1 or later
Other hardware
USB 1.1/2.0
Active Internet connection
Display resolution: XGA (1024 x 768 dots) or higher
News
-
Dec/12/2022E-TUBE PROJECT Cyclist Ver.5.1.3 has been released.
-
- The issue that the application crashes on startup has been resolved.
-
To comply with applicable laws and regulations, there will be a delay in releasing the app in France. We will release the app as soon as possible. We appreciate your patience.
-
Nov/09/2022E-TUBE PROJECT Cyclist Ver.5.1.2 has been released.
-
■ New features
-
- New features of the new EP801/EP600 series products are now supported.
-
■ Fixed issues
-
- General bug fixes
-
Oct/31/2022E-TUBE PROJECT Professional Ver.5.1.2 has been released.
-
■ New features
-
- New features of the new EP801/EP600 series products are now supported.
-
■ Fixed issues
-
- General bug fixes
-
Jun/30/2022E-TUBE PROJECT Professional Ver.5.1.0 has been released.
-
■ New features
-
- Adapted for R7150 series.
-
■ Changes
-
- Added a link to ERROR and WARNING CODE site under SETTING/HELP tab.
-
■ Fixed issues
-
- General bug fixes.
-
Jun/30/2022E-TUBE PROJECT Cyclist Ver.5.1.0 has been released.
-
■ New features
-
- Adapted for R7150 series.
-
■ Fixed issues
-
- General bug fixes.
-
Jun/01/2022E-TUBE PROJECT Professional Ver.5.0.4 has been released.
-
- Windows 11 is now supported.
-
- Modified the PDF report that is output after error checks.
-
- Improved user interfaces.
-
- General bug fixes.
-
May/09/2022E-TUBE PROJECT Cyclist Ver.5.0.4 has been released.
-
- Improved user interfaces.
-
- General bug fixes.
-
Dec/21/2021Released E-TUBE PROJECT Professional Ver. 5.0.3
-
■ New features
-
- Added traditional Chinese.
-
- Added a function to delete the error logs saved in the drive unit.
-
- External link information has been added to the specific drive unit error codes.
-
■ Changes
-
- Improved the modification detection function for unauthorized tuning.
-
■ Fixed issues
-
- Improved user interfaces.
-
- General bug fixes.
-
Dec/21/2021Released E-TUBE PROJECT Cyclist Ver. 5.0.3
-
■ New features
-
- Added traditional Chinese.
-
- Adapted to display the usage ratio of each gear when using BT-DN300.
-
- General improvements.
-
Dec/02/2021Released E-TUBE E-TUBE PROJECT Cyclist Ver. 5.0.2
-
･ New feature (E-TUBE PROJECT Cyclist) The application has been modified to allow upgrading the firmware on ST-R9270/ST-R8170.
-
Nov/24/2021It has been confirmed that pairing the rear derailleur with the dual control lever fails for some units when the version of the firmware on ST-R9270/ST-R8170 is Ver. 4.0.2 or earlier.
-
If pairing fails, use one of the following applications to update the version of the firmware on ST-R9270/ST-R8170 to Ver. 4.0.3 or later.
-
* Follow the steps below to update the firmware using E-TUBE PROJECT Professional Ver.5.0.2 or later or E-TUBE PROJECT Cyclist Ver.5.0.2 or later.
-
E-TUBE PROJECT Professional
-
* Use SM-PCE02 to connect the dual control lever to your PC with a cable and update the firmware, then perform pairing.
-
* Customers who do not own SM-PCE02, contact your place of purchase or a distributor for assistance.
-
Update: https://si.shimano.com/iUM/7J4WA/update/toc_task_nnp_xs2_g4b
-
Pairing: https://si.shimano.com/#/ja/iUM/7J4WA/pairing_process/TOC_PAIRING_PROCESS
-
E-TUBE PROJECT Cyclist
-
* Connect the rear derailleur to the dual control lever with a cable and update the firmware, then perform paring.
-
Update: https://si.shimano.com/iUM/7J4WA/update/toc_task_nnp_xs2_g4b
-
Pairing: https://si.shimano.com/#/ja/iUM/7J4WA/pairing_process/TOC_PAIRING_PROCESS
-
Oct/01/2021With Android 12, you can now select "Approximate location" for your smartphone's location information. However, it has been confirmed that doing so can cause app instability. We recommend that you select "Precise location".
-
Sep/01/2021■ New features (E-TUBE PROJECT Professional)
-
･ Adapted for new DURA-ACE R9250/ULTEGRA R8150 Series.
-
･ Assist mode name display for DU-EP800 can be selected from BOOST/TRAIL/ECO or HIGH/NORMAL/ECO according to preference.
-
･ Added a function to adjust the correct rear derailleur position under the maintenance tab.
-
･ Logo image can be added to PDF report.
-
･ Warning notice to detect unauthorized drive unit tuning.
-
■ Compatibility
-
･ SM-PCE1, SM-BCR2 is no longer compatible.
-
Please connect with SM-PCE02 or use the old version (E-TUBE PROJECT for Windows V4).
-
･ Windows 7 will not be supported. Please use the old version (same as above).
-
■ Changes
-
･ Moved the help screen to the browser.
-
･ Application name will change from "E-TUBE PROJECT for Windows V4" to "E-TUBE PROJECT Professional" from version 5.0.1.
-
･ Revised the wording displayed on the maintenance tab, under SC-E6100 to perform the error check when the battery charge is low.
-
･ Other screen displays and wording have been modified.
-
Sep/01/2021■ New features (E-TUBE PROJECT Cyclist)
-
･ Adapted for new DURA-ACE R9250/ULTEGRA R8150 Series.
-
･ Assist mode name display for DU-EP800 can be selected from BOOST/TRAIL/ECO or HIGH/NORMAL/ECO according to preference.
-
･ Profile images can now be added to your SHIMANO ID account.
-
■ Changes
-
･ Moved the help screen to the browser.
-
･ Application name will change from "E-TUBE PROJECT for mobile" to "E-TUBE PROJECT Cyclist" from version 5.0.0.
-
･ General bug fixes.
-
Aug/18/2021There will be a major version upgrade for E-TUBE PROJECT for Windows V4 in the coming days. Please note the following points related to this upgrade.
-
･ SM-PCE1 and SM-BCR2 will no longer be compatible.
-
･ The application can no longer be used on a PC with Windows 7.
-
Customers who need to upgrade their devices in order to use the application after the major version upgrade, please prepare the following items.
-
･ SM-PCE02
-
･ A PC with Windows 10 or Windows 8.1 installed.
-
Note that you can continue to use the features available in the current version without the upgrade. If you do not need the major version upgrade, please continue using E-TUBE PROJECT for Windows V4.
-
Mar/31/2021The “E-TUBE PROJECT for Windows V4 (Ver. 4.0.4)” will be updated as below:
-
1) Possibility to change the "Light / accessory power terminal output settings"
-
2) Changed the way to display the error log under the maintenance tab.
-
3) New window pops up to show the progress bar, while creating a service report.
-
4) Remaining light capacity time can be set shorter than the current setting value.
-
Mar/31/2021The “E-TUBE PROJECT for mobile (Ver. 4.0.4)” will be updated as below:
-
1) Added new firmware download function that allows the user to download the product firmware when needed.
-
2) Improved the switch customization display by highlighting the switch buttons.
-
3) New drive units added for error log list. (DU-E6100, DU-E6110, DU-E6180, DU-E7000, DU-E5000, DU-E5080, DU-E5080-H).
-
4) Improved the ON/OFF slide switch visibility for the information display.
-
Dec/07/2020Fixed the problem for customers using SM-BCR2 to set up the bicycle via “E-TUBE PROJECT for Windows V4 (Ver. 4.0.2)” that was resulting in disabled operations.
-
Oct/27/2020E-TUBE PROJECT for mobile (Ver. 4.0.2) has been updated as below:
-
iOS14 is now supported. The error log display function (for DU-EP800) has been added.
-
Oct/13/2020E-TUBE PROJECT for Windows V4 (Ver. 4.0.2) has been released. Click here for details.
-
Oct/01/2020The E-TUBE PROJECT for Windows V4 is scheduled to be released in October.
-
Sep/14/2020[iOS] E-TUBE PROJECT for mobile (ver. 4.0.1) was released. We fixed the long update time on the initial screen. Please make sure to update to the latest version.
-
Sep/8/2020[Android] E-TUBE PROJECT for mobile (ver. 4.0.1) was released. We fixed the long update time on the initial screen. Please make sure to update to the latest version.
-
Sep/1/2020E-TUBE PROJECT for mobile Ver.4.0.0 has been released.