E-TUBE PROJECT Professional

방법

애플리케이션 사용량

최상의 두뇌와 힘을 가진 전동식 구동계 DI2 변속 시스템은 사이클링 구동계에서 혁신을 일으켰습니다. DI2는 버튼을 누를 때마다 빠르고 정확하게 가벼운 변속을 제공합니다. 가장 극한 상황에서도 변속이 정확하게 제어됩니다. 경사를 오르거나 과속 등의 과부하 상태에서도 기어를 변경할 수 있습니다. DI2와 함께 자전거를 완벽하게 제어 할 수 있습니다.

SHIMANO E-BIKE SYSTEMS

SHIMANO E-BIKE SYSTEMS은 E-바이크 라이딩과 전통적인 자전거 라이딩 시스템 사이의 경계를 없애기 위해 온전히 개발되었습니다. 포괄적인 접근방식 덕분에 각 시스템 부품과 기술이 개별적이면서 전체적으로 최적화되어 자전거에서 가능한 동작을 새롭게 정의합니다.

제품 지원

FAQ

E-TUBE PROJECT Professional에 관해 자주 묻는 질문은 아래와 같습니다.

FAQ 보기

사용자 설명서

각 제품의 펌웨어 업데이트 기록은 여기를 클릭하십시오.

※XX-XXXX：

Models that are now compatible after the app was updated from Ver. 3.4.5 to 4.0.4
※~~XX-XXXX~~：

Models that are no longer compatible after the app was updated from Ver. 3.4.5 to 4.0.4

Category	E-TUBE PROJECT Ver.3.4.5				E-TUBE PROJECT Ver.4.0.4				Compatibility changes in E-TUBE PROJECT Ver.5.0.0 or later for the products compabile with Ver 4.0.4
Battery Charger	SM-BCR2				SM-BCR2				Not compatible *SM-BCR2 can be used as a charger for Di2 system
Battery Mount	SM-BMR1	SM-BMR2	BM-DN100		SM-BMR1	SM-BMR2	BM-DN100		Same compatibility as Ver.4.0.4 *It might be necessary to update the firmware of the product to be compatible with E-TUBE PROJECT Ver.5.0.0 or later. In such case, please update the firmware with E-TUBE PROJECT Professional Ver. 4.0.4 first.
Battery	SM-BTR2		BT-DN110		SM-BTR2		BT-DN110
Junction	SM-EW90-A	SM-EW90-B	SM-EW67-A-E	EW-RS910	SM-EW90-A	SM-EW90-B	SM-EW67-A-E	EW-RS910
Shift/Brake lever	ST-9070 ST-6770 ST-S705 ST-R9150 ST-R9180	ST-9071 ST-6870 ST-R785 ST-R8050 ST-R8060	ST-R8070 ST-6871 ST-R9160	ST-RX815 ST-R9170	ST-9070 ST-6770 ST-S705 ST-R9150 ST-R9180	ST-9071 ST-6870 ST-R785 ST-R8050 ST-R8060	ST-R8070 ST-6871 ST-R9160	ST-RX815 ST-R9170
Front Derailleur	FD-9070 FD-M9050 FD-R9150	FD-6770 FD-M9070 FD-R8050	FD-6870 FD-M8070 FD-RX815		FD-9070 FD-M9050 FD-R9150	FD-6770 FD-M9070 FD-R8050	FD-6870 FD-M8070 FD-RX815
Rear Derailleur	RD-9070 RD-M9050 RD-R8050 RD-R9150	RD-6770 RD-M8050 RD-RX805	RD-6770-A RD-RX815	RD-6870 RD-RX817	RD-9070 RD-M9050 RD-R8050 RD-R9150	RD-6770 RD-M8050 RD-RX805	RD-6770-A RD-RX815	RD-6870 RD-RX817
System information display	SC-M9050	SC-M9051	SC-MT800	SC-S705	SC-M9050	SC-M9051	SC-MT800	SC-S705
Motor Unit	MU-S705		MU-UR500		MU-S705		MU-UR500
Wireless Unit	SM-EWW01	EW-WU101	EW-WU111		SM-EWW01	EW-WU101	EW-WU111
Suspension Control Switch	820-00-878 (SW-RL70)		820-09-006 (SW-RL71)		820-00-878 (SW-RL70)		820-09-006 (SW-RL71)
Front Suspension Motor Drive	820-00-876 (SM-MU70)		820-09-002 (SM-MU71)		820-00-876 (SM-MU70)		820-09-002 (SM-MU71)
Rear Suspension Motor Drive	820-00-877 (SM-MU75)		820-09-010 (SM-MU76)		820-00-877 (SM-MU75)		820-09-010 (SM-MU76)
Drive Unit	DU-E6001 DU-E6002 DU-E5000 DU-E6100 DU-E8000	DU-E6010 DU-E6012 DU-E5080 DU-E6180 DU-E8080	DU-E6050 DU-E6000 DU-E6110	DU-E7000	DU-E6001 DU-E6002 DU-E5000 DU-E6100 DU-E8000	DU-E6010 DU-E6012 DU-E5080 DU-E6180 DU-E8080	DU-E6050 DU-E6000 DU-E6110	DU-E7000
Cycle Computer	SC-E6000 SC-E6100 EW-EN100	SC-E6010	SC-E7000	SC-E8000	SC-E6000 SC-E6100 EW-EN100	SC-E6010 SC-E5000	SC-E7000 SC-E5003	SC-E8000 SC-EM800
Switch Unit	SW-E6000 SW-9071 SW-M9050 SW-R9150	SW-E6010 SW-S705 SW-M8050 SW-R9160	SW-E7000 SW-R671 SW-R610	SW-E8000 SW-R600	SW-E6000 SW-9071 SW-M9050 SW-R9150	SW-E6010 SW-S705 SW-M8050 SW-R9160	SW-E7000 SW-R671 SW-R610	SW-E8000 SW-R600 SW-EM800
Satellite System ON/OFF Switch	EW-SW100				EW-SW100		EW-SW300
Di2 adapter	EW-EX010		EW-EX020		EW-EX010		~~EW-EX020~~
Power Meter
PC Linkage Device	SM-PCE1		SM-PCE02		SM-PCE1		SM-PCE02		SM-PCE02： Same compatibility SM-PCE1： Not compatible

호환성 차트

지원되는 유닛 및 호환성은 애플리케이션 버전별로 다릅니다. 애플리케이션의 버전을 확인하십시오.

최신 업데이트: 5.4.4-02버전

이 버전에서 지원되는 유닛과 호환성이 변경되었습니다. 최신 버전의 호환성을 확인하십시오.

PDF 다운로드

날짜

버전

다운로드

2025년 11월 13일

2025년 6월 25일

2025년 6월 19일

2025년 6월 5일

2025년 4월 17일

2025년 2월 3일

5.4.4버전

5.4.2-03버전

5.4.2-02버전

5.4.2-01버전

5.4.2버전

5.4.0버전

버전 &
날짜

다운로드

5.4.4버전 2025년 11월 13일

5.4.2-03버전 2025년 6월 25일

5.4.2-02버전 2025년 6월 19일

5.4.2-01버전 2025년 6월 5일

5.4.2버전 2025년 4월 17일

5.4.0버전 2025년 2월 3일

WINDOWS용 이전 버전

일부 제품은 설정을 E-TUBE PROJECT 앱의 이전 버전에서만 구성할 수 있습니다.
호환성 정보 를 참조하여 제공된 링크에서 제품과 호환되는 앱 버전을 다운로드하십시오.

여기에서 다운로드할 수 있는 앱은 모두 Windows PC용입니다. PC 연결 장치 SM-PCE02 또는 SM-PCE1이 있어야 자전거와 통신할 수 있습니다.

Windows 7

앱 버전 4.0.4 이하와 호환 가능 PC 연결 장치 SM-PCE1.

앱 버전 4.0.4 이하와 호환 가능

운영 체제

Windows 7 32비트/64비트
Windows 8.1 32비트/64비트
Windows 10 32비트/64비트

필요한 구성 요소

.NET Framework 3.5 SP1

기타 하드웨어

USB 1.1/2.0
활성화된 인터넷 연결
디스플레이 해상도: XGA(1024 x 768 도트) 이상

Windows XP

앱 버전 3.4.5 이하와 호환 가능

운영 체제

Windows 7 32비트/64비트
Windows 8/8.1 32비트/64비트
Windows 10 32비트/64비트

필요한 구성 요소

.NET Framework 3.5 SP1

기타 하드웨어

USB 1.1/2.0
활성화된 인터넷 연결
디스플레이 해상도: XGA(1024 x 768 도트) 이상

버전 업데이트 히스토리


Nov 10, 2025	5.4.4	■Compatibility ・Added SC-E6100 compatibility to the E6000 series (DU-E6000, DU-E6001, DU-E6010, DU-E6050, DU-E6002, DU-E6012). Updating the firmware on the applicable models is required. (Released at the same time as the FW_v4.2 app) The Bluetooth function of the SC-E6100 is currently unavailable. *Please check the compatibility table for details.
Apr 17, 2025	5.4.2	■New features - A 46-30T front chainring combination can now be set in the synchronized shift settings for FD-RX825. ■Others - Fixed the issue where the semi-synchronized shift setting cannot be configured correctly. - The issue where the service report could not be printed out has been fixed. - Fixed identified issues.
Feb 03, 2025	5.4.0	E-TUBE PROJECT Professional Ver.5.4.0 has been released. ■ Others - Improved user interfaces. - General bug fixes.
Oct 28, 2024	5.3.4	E-TUBE PROJECT Professional Ver.5.3.4 has been released. ■ Others - The user interfaces of the application have been improved. - General bug fixes.
Aug 05, 2024	5.3.3	E-TUBE PROJECT Professional Ver.5.3.3 has been released. ■New features - The information on battery degradation level and service life requirements for the EU battery regulation (Regulation (EU) 2023/1542) is now displayed.
Jun 25, 2024	5.3.2	E-TUBE PROJECT Professional Ver.5.3.2 has been released. ■ New features - Adapted for DU-EP500/DU-E5100. - Adapted for RD-U8050/MU-UR520/SW-EN605-R. - Auto-learning function has been added to auto shift of internal shifting units. (Applicable models: DU-EP801/DU-EP801-CRG/DU-EP600/DU-EP600-CRG/DU-EP500) 1 - The assist carry over function has been added to the assist settings. This function allows you to specify the duration that assist continues after pedaling stops. (Applicable model: DU-EP801)1 - The assist cutoff function has been added to the assist settings. This function allows you to select when the assist output starts to decrease when it is near the maximum speed limit. (Applicable models: DU-EP801/DU-EP600)1 - Internal gear ratios (highest/lowest) of third-party internal shifting units can now be set to the applicable drive units. (Applicable models: DU-EP801/DU-EP801-CRG/DU-EP600/DU-EP600-CRG) 1　 - A destination territory can now be set for the following models: DU-EP801/DU-EP801-CRG/DU-EP600/DU-EP600-CRG 1 - The settings for bicycles with FH-U6060 can now be configured using the preset function. 1 Updating the firmware on the applicable models is required to use this function. ■ Others - The user interfaces of the application have been improved. - General bug fixes.
Mar 05, 2024	5.2.6	■ Changes - User interfaces for auto shift have been improved. ■ Others - General bug fixes.
Oct 19, 2023	5.2.3	E-TUBE PROJECT Professional Ver.5.2.3 has been released. ■ Others - Improved user interfaces. - General bug fixes.
Aug 24, 2023	5.2.2	■ Fixed issue ・ The issue with the displayed compatibility between the DU-EP600/DU-EP600-CRG/DU-EP801/DU-EP801-CRG and the battery has been fixed.
Jul 20, 2023	5.2.1	■ Others - General bug fixes.
Jun 01, 2023	5.2.0	E-TUBE PROJECT Professional Ver.5.2.0 has been released. ■ Changes - Support for Windows 8.1 has ended. - Tooth selection for drivetrain settings has become more flexible. ■ Others - Improved user interfaces. - Fixed identified issues.
Apr 20, 2023	5.1.7	E-TUBE PROJECT Professional Ver.5.1.7 has been released. ■ Fixed Issue The Issue with SM-PCE2 firmware update has been fixed. The firmware update Issue for SM-PCE02.
Mar 30, 2023	5.1.6	E-TUBE PROJECT Professional Ver.5.1.6 has been released. ■ Changes - The settable ranges for climbing responsiveness and gear shifting timing of DU-EP801/600 have been expanded. - A function that displays the information on connected third-party systems has been added. ■ Others - Improved user interfaces. - Fixed identified issues.
Oct 31, 2022	5.1.2	E-TUBE PROJECT Professional Ver.5.1.2 has been released. ■ New features - New features of the new EP801/EP600 series products are now supported. ■ Fixed issues - General bug fixes.
Jun 30, 2022	5.1.0	E-TUBE PROJECT Professional Ver.5.1.0 has been released. ■ New features - Adapted for R7150 series. ■ Changes - Added a link to ERROR and WARNING CODE site under SETTING/HELP tab. ■ Fixed issues - General bug fixes.
Jun 01, 2022	5.0.4	E-TUBE PROJECT Professional Ver.5.0.4 has been released. - Windows 11 is now supported. - Modified the PDF report that is output after error checks. - Improved user interfaces. - General bug fixes.
Dec 21, 2021	5.0.3	E-TUBE PROJECT Professional Ver.5.0.3 has been released. ■ New features - Added traditional Chinese.　 - Added a function to delete the error logs saved in the drive unit. - External link information has been added to the specific drive unit error codes. ■ Changes - Improved the modification detection function for unauthorized tuning. ■ Fixed issues - Improved user interfaces. - General bug fixes.
Nov 24, 2021	5.0.2	E-TUBE PROJECT Professional Ver.5.0.2 has been released. It has been confirmed that pairing the rear derailleur with the dual control lever fails for some units when the version of the firmware on ST-R9270/ST-R8170 is Ver. 4.0.2 or earlier. If pairing fails, use one of the following applications to update the version of the firmware on ST-R9270/ST-R8170 to Ver. 4.0.3 or later. * Follow the steps below to update the firmware using E-TUBE PROJECT Professional Ver.5.0.2 or later or E-TUBE PROJECT Cyclist Ver.5.0.2 or later. E-TUBE PROJECT Professional * Use SM-PCE02 to connect the dual control lever to your PC with a cable and update the firmware, then perform pairing. * Customers who do not own SM-PCE02, contact your place of purchase or a distributor for assistance. Update: https://si.shimano.com/iUM/7J4WA/update/toc_task_nnp_xs2_g4b Pairing: https://si.shimano.com/um/7J4WA/PAIRING_PROCESS
Sep 01, 2021	5.0.1	E-TUBE PROJECT Professional Ver.5.0.1 has been released. ■ New features ･ Adapted for new DURA-ACE R9250/ULTEGRA R8150 Series. ･ Assist mode name display for DU-EP800 can be selected from BOOST/TRAIL/ECO or HIGH/NORMAL/ECO according to preference. ･ Added a function to adjust the correct rear derailleur position under the maintenance tab. ･ Logo image can be added to PDF report. ･ Warning notice to detect unauthorized drive unit tuning. ■ Compatibility ･ SM-PCE1, SM-BCR2 is no longer compatible. Please connect with SM-PCE02 or use the old version (E-TUBE PROJECT for Windows V4). ･ Windows 7 will not be supported. Please use the old version (same as above). ■ Changes ･ Moved the help screen to the browser. ･ Application name will change from "E-TUBE PROJECT for Windows V4" to "E-TUBE PROJECT Professional" from version 5.0.1. ･ Revised the wording displayed on the maintenance tab, under SC-E6100 to perform the error check when the battery charge is low. ･ Other screen displays and wording have been modified.
Mar 31, 2021	4.0.4	The “E-TUBE PROJECT for Windows V4 (Ver. 4.0.4)” will be updated as below: 1) Possibility to change the "Light / accessory power terminal output settings" 2) Changed the way to display the error log under the maintenance tab. 3) New window pops up to show the progress bar, while creating a service report. 4) Remaining light capacity time can be set shorter than the current setting value.
Dec 07, 2020	4.0.3	Fixed the problem for customers using SM-BCR2 to set up the bicycle via “E-TUBE PROJECT for Windows V4 (Ver. 4.0.2)” that was resulting in disabled operations.
Oct 13, 2020	4.0.2	1. Compatibility - Adapted for new EP8 series. 2. Add function - Added Driving Status function to display the driving records. - Added Troubleshooting & Errors history under maintenance tab. - Added new function to display the updated contents of newly released firmware. 3. Change function - Graphical User Interface has been completely changed. - Maintenance check list report function has been expanded. -Shortened the time required to update the firmware of the new unit.(Only when using SM-PCE02)
Nov 11, 2019	3.4.5	To fix the issue of current E-TUBE PROJECT (Public ver. 3.4.3) that cannot update the firmware for SC-E6100/SC-E7000/EW-EN100, when multiple users log in the same computer.
May 22, 2019	3.4.3	1. Compatibility. - Adapted for SHIMANO STEPS (DU-E6180、DU-E5080、BT-E8035、EW-SW100) and GRX RX810 series. - Added interchangeability between DU-E8080 with SC-E6100/SC-E7000/EW-EN100. - Added interchangeability between SHIMANO STEPS with Road components (ST-R8070/RX815、RD-R8070/RX805/RX815/RX817)Adapted for INTER-5, when connecting DI2 Adapter with MU-UR500. 2. Adapted for 3 new mode (High, Medium, Low) for riding characteristic of ECO Mode. 3. Display speed adjustable function added for cycle computer. (Drive unit is controlled by the actual speed) 4. Wireless mode settings option for third party company cycle computers. Default mode is both mode ON (ANT+ and BLUETOOTH), however with new setting option user can save battery consumption of Wireless communication by turning OFF unnecessary mode. This choice does not affect the E-TUBE for mobile version.
Nov 05, 2018	3.4.1	- Updated to extend the lighting time when assist mode is OFF due to low battery level. - Improved function for battery consumption checking - Secured firmware update for E5000 / E6100 / E7000 series
Oct 05, 2018	3.4.0	Adapted for - STEPS (E6100/E7000/E5000 series) - PC Linkage Device, SM-PCE02
Apr 27, 2018	3.3.4	・Adopted for Gravel/Adventure Road Bike rear derailleur, RD-RX805 ・Bug fixing
Dec 26, 2017	3.3.2	Bug fixing
Sep 28, 2017	3.3.1	Bug fixing for ULTEGRA Di2 updated (6770 series)
Aug 16, 2017	3.3.0	Adapted for - ULTEGRA Di2 (R8050 series) - Drive unit, DU-E6002/6012/8080 - Shifting switch, SW-E6010 - D-FLY
May 24, 2017	3.2.2	Bug fixing
Mar 10, 2017	3.2.1	Customized menu for DURA-ACE DI2 (9070 series) /ULTEGRA DI2 (6870 series) (synchronized shifting)
Dec 09, 2016	3.2.0	1. Adopting to DURA-ACE Di2 (R9150 series) 2. Adopting to wireless unit (EW-WU111) / Junction-A (EW-RS910) 3. Customized menu for road series (Synchronized shifting) 4. Customized switch function
Nov 09, 2016	3.1.0	Adapting to following models -STEPS E8000 series -BT-E6001 -SC-M9051 Updated E-TUBE PROJECT display *Watt/Calorie function is not displayed on cycle computer, SC-E8000 though the function is available on E-tube project.
Sep 16, 2016	3.0.1	Adapted for all components, including DEORE XT Di2
Jul 15, 2016	3.0.0	Changing main menu, and adapting to the following models Deore XT Di2 series BM-DN100 EW-WU101 SC-MT800 RD-M8050 FD-M8070 SW-M8050R SW-M8050L
Dec 25, 2015	2.11.1	Adapting following model and functions; -Windows 10 -Small wheel circumference (E6000 series) -Full Automatic Shifting (E6000 series) -Additional language (Chinese/E-bike) -RD-6770-A
Sep 01, 2015	2.11.0	Adapting to the following model(version) and new functions. SC-E6010 DU-E6010 BM-E6000 BM-E6010 SC-E6000(ver.3.0.1) DU-E6000 (ver.3.0.0) DU-E6001/E6050(ver.3.0.2) Light off road setting* SC back up report. Database system Belt drive setting. Reducing firmware time/frequency *Light off road setting is available for bike manufacturer only.
Jul 03, 2015	2.10.0	Windows XP support end New user interface Additional single unit connection mode Adapting EW-EX020 (Di2 Adapter-A)
Jan 15, 2015	2.9.0	Adapting STEPS DU-E6050
Nov 06, 2014	2.8.1	Adapting EW-EX010
Oct 06, 2014	2.8.0	Improvement of usability
Aug 07, 2014	2.7.0	- Adapting Shimano STEPS E6000 series - Adapting Start Mode (E6000 series) - Adapting Walk Assist Mode (E6000 series) - Improvement of Preset function - Adapting French, Spanish, Italian in E-BIKE category
Jul 14, 2014	2.6.0	- Adapting XTR M9050 (Di2) series and FOX iCTD .
May 29, 2014	2.5.2	- Revision of German description in report.
Apr 16, 2014	2.5.1	- Improving usability of data uploading.
Jan 14, 2014	2.5.0	- Adapting Shimano STEPS E6000 series - Adapting wireless unit, SM-EWW01
Nov 02, 2013	2.4.0	Adapted to Windows 8/8.1 32bit/64bit
Jul 25, 2013	2.3.0	- Adapt ULTEGRA 6870 series - Adapt road hydraulic disc brake R785 - End of updates for Microsoft Windows XP 64bit - Compatible switch unit is added - Improvement of display screen
Jun 20, 2013	2.2.3	Improvement of usability
Apr 09, 2013	2.2.1	Improvement of usability
Dec 04, 2012	2.2.0	- Adapted Dura-Ace Di2 (9070) - Adapted Alfine Di2 - Adapted multi shifting of RD-6770* *To adapt multi shifting function, RD-6770 and SM-BMR1 need to be updated to ver.2.0.1 or later.
Sep 07, 2012	2.0.0	- Adapted FOX Float iCD suspension. - Adapted SW-R671 (Remote Triathlon shifter)
Apr 26, 2012	1.4.1	- Fixed Firmware Download - Fixed SW-R600 shifting switch function
Apr 06, 2009	1.2.5	The first edition

이용약관 업데이트 안내 (EEA 거주자 대상)

2025년 8월 29일

당사 앱을 지속적으로 이용해 주셔서 진심으로 감사드립니다.

EU 데이터법 준수를 위해 2025년 9월 12일부터 이용약관을 업데이트할 예정입니다.

https://bike.shimano.com/en-UK/products/apps/tou/professional/tou-e-tube-project-professional.html

이번 업데이트는 유럽경제지역(EEA)에서 앱을 사용하는 사용자에게 적용됩니다.

해당 날짜부터 EEA 사용자들은 앱을 계속 사용하기 위해 업데이트된 이용약관에 다시 동의해야 합니다.2025년 9월 12일 이후 앱을 계속 사용하는 경우, 업데이트된 이용약관에 동의한 것으로 간주됩니다.

업데이트된 이용약관에 동의하지 않으시는 경우, 2025년 9월 12일부터 앱 사용을 중단해 주시기 바랍니다.

이번 업데이트는 EEA 사용자에게만 해당되므로, 업데이트된 이용약관은 앱에서 지원하는 유럽 언어(영어, 네덜란드어, 독일어, 프랑스어, 이탈리아어, 스페인어)로만 제공됩니다.

다른 언어(예: 일본어, 중국어)로 앱을 사용하는 EEA 사용자께서는 영어 버전의 이용약관을 참고해 주시기 바랍니다.

이해해 주셔서 감사드리며, 더 나은 서비스를 제공할 수 있도록 노력하겠습니다.

공지: 본 안내문의 공식 언어는 영어입니다. 더 많은 사용자에게 제공하기 위해 여러 언어로 기계 번역을 사용하여 제공하고 있습니다. 기계 번역의 정확성이나 완전성은 보장되지 않으니 참고 바랍니다.

새로운 E-TUBE PROJECT for Windows V4(4.0.2버전)에 관해 업데이트된 정보

“E-TUBE PROJECT for Windows V4(4.0.2버전)”의 새로운 애플리케이션이 2020년 10월 13일에 공개되었습니다.

“E-TUBE PROJECT for Windows V4(4.0.2버전)”는 다음과 같이 업데이트됩니다.

1) EP8 시리즈에 적응.

2) 주행 기록을 표시하기 위한 주행 상태 기능 추가.

3) 유지보수 탭 아래에 문제 해결 & 오류 히스토리 추가.

4) 새롭게 공개된 펌웨어의 업데이트된 내용을 표시하기 위한 새로운 기능 추가.

5) 완전히 바뀐 그래픽 사용자 인터페이스.

6) 확장된 유지보수 점검 목록 보고 기능.

7) 새로운 유닛의 펌웨어 업데이트에 필요한 시간 단축(SMPCE02를 사용하는 경우만 해당).

8) DU-E5000으로 어시스트 패턴 설정 가능.

9) E-TUBE PROJECT for Windows V4(4.0.2버전)에서는 Windows 8을 지원하지 않음.

SELECT LOCATION AND LANGUAGE

GLOBAL

ENGLISH

AMERICAS

ENGLISH

FRANÇAIS

PORTUGUÊS

ESPAÑOL

EUROPE

FRANÇAIS

NEDERLANDS

NEDERLANDS

DEUTSCH

FRANÇAIS

ITALIANO

DEUTSCH

FRANÇAIS

DEUTSCH

ITALIANO

ESPAÑOL

PORTUGUÊS

POLSKI

ENGLISH

SVENSKA

DANSK

NORSK

SUOMI

ASIA

日本語

简体中文

繁體中文

한글

ENGLISH

OCEANIA

ENGLISH

ENGLISH

그룹셋

부품

서비스 및 업그레이드 부품

앱

주요 기술

부품 기술

유용한 링크

스토리

그룹셋

SHIMANO E-BIKE SYSTEMS

부품

서비스 및 업그레이드 부품

앱

주요 기술

부품 기술

유용한 링크

스토리

그룹셋

부품

서비스 및 업그레이드 부품

앱

주요 기술

부품 기술

유용한 링크

스토리

그룹셋 액티브

그룹셋 컴포트

SHIMANO E-BIKE SYSTEMS

부품

서비스 및 업그레이드 부품

앱

주요 기술

부품 기술

유용한 링크

스토리

SHIMANO E-BIKE SYSTEMS

부품

서비스 및 업그레이드 부품

앱

주요 기술

부품 기술

유용한 링크

스토리

풋웨어